THE RIGHT KIND OF FIREPLACE FOR YOUR HOME:
If you are thinking about the addition of a fireplace to your house, then the first thing you need to decide is which kind of fireplace would best fit your house.
Natural gas inserts and freestanding stoves help to not only keep your house warm, but also burn cleaner and help preserve indoor air quality. Regardless of todays high natural gas costs, these sell much better than wood burning fireplaces, and produce less outdoor pollution problems.
Gas fireplaces, gas inserts, and pellet stoves are popular among todays consumers in supplying effective zone heating. When you consider these kinds of fireplaces as an extra heat source, you will see utility costs drop, due to the fact you do not need to keep the thermostat set as high as you would without it. A natural gas fireplace can efficiently heat up to 1,000 square feet of living space in your house.
CONSIDERATIONS FOR FIREPLACE SELECTIONS:
Before choosing the type of fireplace that would be best for you and the model that you would like to have, bear in mind some of the following points:
Masonry wood burning fireplaces can lose up to 85 % of their heat through the chimney. They are also considered to be high polluters of the outside air, and cause problems with air quality and cleanliness in the house. Gas fireplace inserts can be set up in practically any existing masonry fireplace. Masonry fireplaces also come in a broad variety of design and styles.
Other factors that ought to be considered are the climate you live in, the location of your house, and the age of your house. Also consider the construction of your house, in addition to the amount of heat that is required to keep it warm.
If you are considering buying a fireplace for zone heating, consider gas fireplaces, gas inserts and pellet appliances. It is suggested to purchase gas fireplace systems with an A.F.U.E. Annual Fuel Utilization Efficiency rating.
Direct vent gas fireplaces are required to be kept close to an outdoor wall Phoenix Arizona Heating Repair . They need air from the outside to feed the flame, while reasonably cool gases are exhausted through a wall mounted or roofing vent.
Vent free fireplaces do not need outside venting. This kind of fireplace is not suggested in newer homes, since they can produce condensation within the house over time. These are also open fireplaces that do not have doors on them.
Class B vents are needed for traditional gas fireplaces. The Class B roof vent flue helps carry away hot flammable gases, and most have operable doors.
Pellet appliances are free standing stoves or fireplace inserts that burn wood based pellets made mainly from compressed sawdust. These are primarily used for zone heating, and were created to make use of waste wood produced by manufacturing companies. They are a highly effective way to burn these waste wood products that can be bought in 40 lb. bags. These pellet appliances can be used to burn alternative fuels consisting of corn and grains. One advantage of pellet fuel is the ability to lock in fuel costs at the beginning of the fall and winter seasons.